Skip to content
Block, Walls and Structure

Masonry Openings

Cutting an opening in a masonry wall means supporting what is above. We shore the wall, cut the opening cleanly, set the lintel and frame, and blend the brick around it so the new door or window looks original.

Masonry Openings by Brick Illusions
  • WorkDoors, windows, vents and passages
  • SupportShoring and a new lintel
  • CutClean saw cuts, with minimal damage
  • FinishBrick toothed in to match
What you get

What is included

  1. 1Support before cuttingWalls are shored before any brick is removed, so the wall above stays safe.
  2. 2Clean cutsSaws make straight cuts that leave neighboring brick and mortar intact.
  3. 3A lintel that carriesProperly sized steel or reinforced masonry spans the new opening.
  4. 4A blended finishNew brick is toothed into the old so the repair does not show.
How it works

From your first call to the final cleanup

We lay, repair and restore brick, stone and block in cities across the country. Find yours below and set up a walk-through.

  1. 1We walk the siteWe look at the wall, yard or roofline together, talk through the look you want and note what is already there.
  2. 2We set the layoutLines, levels and measurements are marked first, so every course starts straight and the finished work sits true.
  3. 3We build course by courseUnits are set on a full bed of mortar, checked with level and line, and the joints are struck as we go.
  4. 4We finish and clean upJoints are tooled, surfaces are cleaned and the site is left tidy, with a walk-through at the end.
Good fit when

Is this the right choice for your project?

  • Adding a door or window to a brick house
  • Enlarging an opening
  • Closing an old opening in matching brick
  • Running a vent or utility through a wall
Good to know

What makes structural masonry hold

  • The footingEvery wall sits on a footing sized for its weight and the soil beneath.
  • The steelReinforcement and grout give block and tall walls their strength.
  • The drainageWater pressure is the usual enemy of retaining and foundation walls, so drainage is part of every plan.
Questions

Common questions

Can you cut a door into a brick wall?

Yes. With shoring, a lintel and careful cutting, it is a routine job for masonry crews.

Can you close up an old window or door?

Yes. We fill the opening with brick that matches and tooth it into the wall.

Will the new brick match the old?

We blend color and size as closely as we can, and the match improves as the wall weathers.

Where we work

Find your city

Type your city or neighborhood to open the page for help near you.

Start typing, for example a city name or a neighborhood.

    Ready to build something that lasts?

    Call or text Brick Illusions, or send the form, and we will set up a walk-through. Tell us about your wall, chimney or yard and what you would like it to become.

    Walk-through

    Let's build something that lasts together.

    Tell us about your wall, chimney or yard and what you would like it to become. We read every message and reply with clear next steps and a time for your walk-through.

    • Your masonry: what you have now and the look you want
    • Your city, the size of the project, and any result you saved from a tool on this site
    • A walk-through where we look at the masonry, listen to what you want and begin a plan around it
    Prefer to talk? Call or text800-224-9245

    Your estimate request

    Prefer to type? Text your request. We only use your details to respond to your request.