Chimney Repair
A chimney stands in the weather on every side, so it wears faster than the walls below it. We repair damaged brick and mortar, fix flashing and crowns where water gets in and make the stack sound again.

- FixesMortar joints, loose brick, crowns and flashing
- CauseWater entry traced first
- AccessScaffold, ladder or roof anchors
- ResultA stack that is sound and weather-tight
What is included
- 1The cause firstWater stains inside and flaking brick outside both point to a path water takes, and we find it.
- 2Repairs that matchMortar and brick are matched to the stack so repairs blend with the original.
- 3Flashing and crown checkedThe crown and the flashing are where most leaks start, so we look at both every time.
- 4Safe work at heightScaffolds and anchors keep the work safe and the roof protected.
From your first call to the final cleanup
We lay, repair and restore brick, stone and block in cities across the country. Find yours below and set up a walk-through.
- 1We find the causeWe look closely at the masonry and trace the damage back to its source, because a repair only lasts if the cause is solved.
- 2We agree the planYou see what needs to come out, what stays and how the repair will blend with the old work.
- 3We repair and rebuildDamaged units and mortar are removed carefully and replaced with matching material, laid in the right order.
- 4We protect and tidyThe finished work is cleaned, protected where it makes sense, and the area is left clean.
Is this the right choice for your project?
- Brick falling or loose at the top of a chimney
- Water stains on ceilings near the chimney
- Crumbling mortar or white staining
- Chimneys that lean or have visible cracks
What keeps a chimney sound
- The topThe crown and the cap do most of the work of keeping water out.
- The rooflineFlashing where the chimney meets the roof is the most common leak point.
- The linerA good flue liner protects the masonry and the house from heat and smoke.
Common questions
How do I know my chimney needs repair?
Look for crumbling mortar, brick that is flaking or loose, white staining, rust at the damper and water marks on walls and ceilings near the fireplace.
Can a leaning chimney be fixed?
Sometimes it can be repaired, sometimes it needs partial or full rebuilding. We look at the cause and tell you honestly.
Should I repair before winter?
Repairs are best done before the freeze, because water in cracks expands and makes damage worse.
Services that pair with this one
Chimney RebuildingWhen a stack is past repair, we take it down to sound masonry and rebuild it brick by brick.See the service Chimneys
Chimney Crowns and CapsThe top of a chimney is its roof. A good crown and cap keep water, animals and sparks out.See the service Chimneys
Chimney WaterproofingA breathable water repellent, plus the flashing and crown fixes behind it, to keep rain out of the stack.See the service Find your city
Type your city or neighborhood to open the page for help near you.
Start typing, for example a city name or a neighborhood.
Ready to build something that lasts?
Call or text Brick Illusions, or send the form, and we will set up a walk-through. Tell us about your wall, chimney or yard and what you would like it to become.

